uhmwpe crane outrigger pads, pump outrigger pads

Brand : XINXING
uhmwpe crane outrigger pads, pump outrigger pads
INQUIRY

uhmwpe crane outrigger pads, pump outrigger pads


Specification
Square Outrigger Pad
Round Outrigger Pad
Common size
Loading capacity for crane feed
Common size
Loading capacity for crane feed
300*300*40mm
3-5 tons
300*40mm
2-6 tons
400*400*40mm
4-6 tons
400*40mm
3-7 tons
400*400*50mm
6-10 tons
500*40mm
4-8 tons
500*500*40mm
10-12 tons
500*50mm
8-12 tons
500*500*50mm
12-15 tons
600*40mm
10-14 tons
500*500*60mm
13-17 tons
600*50mm
12-15 tons
600*600*40mm
15-18 tons
600*60mm
15-20 tons
600*600*50mm
16-20 tons
700*50mm
22-30 tons
600*600*60mm
18-25 tons
700*60mm
25-32 tons
700*700*60mm
25-35 tons
700*70mm
30-35 tons
800*800*70mm
30-45 tons
800*70mm
40-50 tons
1000*1000*80mm
50-70 tons
1000*80mm
45-60 tons
1200*1200*100mm
60-100 tons
1200*100mm
50-90 tons
1500*1500*100mm
120-180 tons
1500*100mm
80-150 tons
Customized size and shape on demand

How to Calculate Outrigger Pad Loading weight? UHMWPE Crane outrigger pads

Now adays many people use UHMWPE crane outrigger pads as the crane foot support pads, however different loading weight crane should different size of outrigger pads, how to caculate them ? XINXING give you some guide as follows:

 

When working with a hydraulic truck crane, you cannot rely on its tires to keep the vehicle and the load completely stable during the lifting operation. The truck employs four outriggers that act as balances and serve to keep the crane from leaning too much to one side or the other. However, it is a common mistake to assume that the weight of a load on a crane will be equally distributed across all four pads. You need to calculate the potential force that will be exerted on one pad before deciding whether or not it is safe to perform the lift.

Other People Are Reading
 How to Calculate a Concrete Pad Load How to Calculate the Load Capacity of a Jib Crane
Things You'll Need
Calculator
Add the weight of the crane itself to the weight of the load you are attempting to lift to get the total weight that will be pushing down on the outrigger pads. It doesn't matter if you are using the metric or English standard systems.

Multiply the square of the radius of one of the outrigger pads by pi to obtain its surface area. The radius of the pad is equal to half of its diameter. Be sure to use the same system of measurement, metric or English standard, that you used in Step 1.

Divide the total weight calculated in Step 1 by the surface area calculated in Step 2 to obtain the total potential load that will be exerted on one of the outrigger pads, either in pounds or kilograms. If your crane is not rated to handle this amount or more, it is not safe to perform the lift

Thanks and Br.
Ms.Jade Young, emial: jade@sdxxhg.com
Shandong Ningjin Xinxing Chemical Co.,Ltd.
Liaohe Road,Ningjin Industry zone, Shandong, China
T:86-15653401606  F:86-534-7074626 |