UHMWPE Rod, UHMWPE Bar; UHMWPE Roller

Buy high density polyethylene 5mm color plastic hdpe rod bar stock welder

Inquire Now Next Product

Product Overview

HDPE Rod details:

Color: White / Black /colorful

Diameter: 3-50mm / 55-150mm / 160-200mm / 210 -400mm
Length: 1000mm or Other cutting size

HDPE Rod Advantages:

--Highest abrasion resistance of any polymer, 6 times more wear resistant than steel
--Anti-Weather & Anti-Aging
--Self-lubricating, Very low coefficient of friction
--Excellent chemical & corrosion resistant
--superior impact resistant, Noise- absorption, Vibration-absorption
--Temperature range: -2600C ~ +800C; Very high resistance to cold,doesn't become fragile even under -1800C

--High tensile Strength
--Non-Toxic and smell
--UV resistance
--Flame Retardant; Relatively low in water absorption
--Excellent electrical properties
--Good performance in resisting environment stress crack, 200 times of ordinary PE
--No adhesion
--Light weight and easier to handle and fix
--Cost efficient; Resulting in low energy consumption
--Does not rot, split or crack; 100% recyclable
--Great liner material for industrial material handling applications
--Easy Reprocessed

Normal Standard Sizes
Length(mm)	Width(mm)	Thickness(mm)
2000	1000	6-300
3000	1500	6-300
4700	1200	6-300
5000	1300	6-300
4500	2000	6-300
3050	1220	6-100
1.Thickness:6-300mm
2.Width:max 2000m
Any small size need us to cut , we can satisfy your special need .

Specifications

buy high density polyethylene 5mm color plastic hdpe rod bar stock welder

NO.	Item	Unit	Test standard	Result
1	Density	g/cm3	GB/T1033-1966	0.95-1
2	Molding shrinkage %		ASTMD6474	1.0-1.5
3	Elongation at break	%	GB/T1040-1992	238
4	Tensile strength	MPA	GB/T1040-1992	45.3
5	Ball indentation hardness test 30g	MPA	DINISO 2039-1	38
6	Rockwell hardness	R	ISO868	57
7	Simply supported beam hardness	KJ/M	ISO179	85
8	Bending strength	MPA	GB/T9341-2000	23
9	Compression strenth	MPA	GB/T1041-1992	24
10	Static softening temp.		ENISO3146	132
11	Specific heat	KJ(kg.k)		2.05
12	Impact strength	KJ/m3	D-256	100-160
13	Heat conductivity{w/(m.k)}	%(m/m)	ISO11358	0.16-0.14
14	Sliding properties and friction coefficient		PLASTIC/STEEL(WET)	0.19
15	Sliding properties and friction coefficient		PLASTIC/STEEL(DRY)	0.14